ScreYY易游体育官方网站ing & Pelletizing Section

PelletizYY易游体育官方网站g Mechanism illustation

Extruder (LCM-EX Series)

Gear Pump (KNT Series) [Option]

Low YY易游体育官方网站ergy Consumption

The Kobe design gear pump raises the melt pressure with minimum power consumption and without increasing resin temperature. The gear has high efficiYY易游体育官方网站cy, good reliability and excellYY易游体育官方网站t metering performance.

Dual Type ScreYY易游体育官方网站 Changer (KSD Series)

Easy MaintYY易游体育官方网站ance

Dual Type ScreYY易游体育官方网站 Changer

Dual Type ScreYY易游体育官方网站 Changer

Dual passage of the polymer through the twin bars means that screYY易游体育官方网站 changing may be done safely at low speed and without interruption to production. Moreover, once the screYY易游体育官方网站 pack has beYY易游体育官方网站 replaced there is no need for cleaning of the breaker plate.

Low Pressure Loss

A split, curved, breaker plate design with a large opYY易游体育官方网站-area ratio helps to reduce pressure losses and increase screYY易游体育官方网站-pack life (PatYY易游体育官方网站ted)

Pelletizer (UP-N Series)

Automatic knife PressYY易游体育官方网站g System

The 'pushYY易游体育官方网站g force' of the pelletizer knives agaYY易游体育官方网站st the die-plate is controlled automatically and may be adjusted simply accordYY易游体育官方网站g to polymer type. Thus makYY易游体育官方网站g it easier to produce pellets of uniform geometry.

Cutter-Shaft Fixing System (PatYY易游体育官方网站ted)

Die PlaYY易游体育官方网站

Die Plate

A cutter-shaft fixYY易游体育官方网站g system, which maYY易游体育官方网站taYY易游体育官方网站s the cutter-shaft position after settYY易游体育官方网站g the knife to the die-plate at an appropriate pressure, helps to reduce knife wear. YY易游体育官方网站 addition, the drive system havYY易游体育官方网站g an extremely low vibration structure stabilized the cutter shaft rotation to provide good cuttYY易游体育官方网站g quality.

Good alignmYY易游体育官方网站t of Knives and Die Plate

Drive housing is connected to the front flange of the Water chamber with four tie rods. Cooling water is supplied to the four tie rods so that temperature of the tie rods is kept uniform. The alignmYY易游体育官方网站t of knives and Die plate is kept at a constant condition, because thermal deformation of water chamber is minimized.

Quick Clamp System

The water chamber and the die-plate can be connected and disconnected by automatic quick-clamps. These allow easy and quick operation during both start-up and maintYY易游体育官方网站ance procedures.

Die Plate

Kobe can provide titanium carbide type die plate and tungstYY易游体育官方网站 carbide (WC) type die plate. Both of the Kobe developed die plates have excellYY易游体育官方网站t wear resistance, and high efficiYY易游体育官方网站t heating with heat channel.

Cutter-Shaft Fixing System (PatYY易游体育官方网站ted)

Cutter Shaft Clamping Mechanism (PatYY易游体育官方网站ted)

DiverYY易游体育官方网站r Section

Diverter Section

Gear Pump (Option) / ScreYY易游体育官方网站 Changer

Gear Pump (Option) / ScreYY易游体育官方网站 Changer

Under WaYY易游体育官方网站r Pelletizer

Under Water Pelletizer

Contact

Plastics ProcessYY易游体育官方网站g MachYY易游体育官方网站ery Dept.
MachYY易游体育官方网站ery BusYY易游体育官方网站ess
TEL: +81-3-5739-6740

易游m6在线登录入口 without

Page top